Exploit Nokia S60 SMS/MMS (Curse of Silence) - Denial of Service

[Exploiter]

EDB-ID

7632

Проверка EDB

1. Пройдено

Автор

TOBIAS ENGEL

Тип уязвимости

DOS

Платформа

HARDWARE

CVE

null

Дата публикации

2009-01-01

Vulnerability Advisory
======================

Remote SMS/MMS Denial of Service - "Curse Of Silence"
for Nokia S60 phones


URL
===

https://berlin.ccc.de/~tobias/cos/s60-curse-of-silence-advisory.txt


Video
=====

https://berlin.ccc.de/~tobias/cos/s60-curse-of-silence-demo.avi


Affected Products
=================

All Nokia Series60 2.6, 2.8, 3.0, 3.1 devices, see detailed list at
the end of the document.


Requirements to Execute Attack
==============================

- MSISDN of the target
- mobile phone contract that allows sending of SMS messages
- (almost) any Nokia phone (or some other means of sending SMS
  messages with TP-PID set to "Internet Electronic Mail")


Risk Level
==========

Medium (for S60 2.8 and 3.1 devices): Target will not be able to
receive any SMS or MMS messages while the attack is ongoing. After
that, only very limited message receiving is possible until the device
is Factory Resetted

High (for S60 2.6 and 3.0 devices): Target will not be able to receive
any SMS or MMS messages until the device is Factory Resetted


Summary
=======

Emails can be sent via SMS by setting the messages Protocol Identifier
to "Internet Electronic Mail" and formatting the message like this:

<email-address><space><message body>

If such messages contain an <email-address> with more than 32
characters, S60 2.6, 2.8, 3.0 and 3.1 devices are not able to receive
other SMS or MMS messages anymore. 2.6 and 3.0 devices lock up after
only one message, 2.8 and 3.1 devices after 11 messages.


Details
=======

3GPP TS 23.040 specifies a method for sending emails via SMS in
section 3.8 ("SMS and Internet Electronic Mail interworking"). In its
most basic form, such a SMS message starts with the from- (MT-SMS) or
to-email-address (MO-SMS), followed by a space character, and then the
message body. The TP-Procotol-Identifier of the SMS message has to be
set to "Internet Electronic Mail" (value: 50 / 0x32).

It is not specified how such a message should be displayed when
received by the phone. Before S60 2.6, Series60 devices displayed such
messages exactly as they were sent. Starting with S60 2.6, when the
part of the message that should contain the from-address looks
anything like an email address (i.e. it contains an "@" somewhere),
this address is then displayed as the message sender instead of the
usually shown TP-Originating-Address.

If this email address is longer than 32 characters, Series60 2.6, 2.8,
3.0 and 3.1 devices fail to display the message or give any indication
on the user interface that such a message has been received. They do,
however, signal to the SMSC that they received the message by sending
an RP-ACK.

Devices running S60 2.6 or 3.0 will not be able to receive any other
SMS message after that. The user interface does not give any
indication of this situation. The only action to remedy this situation
seems to be a Factory Reset of the device (by entering "*#7370#").

Devices running S60 2.8 or 3.1 react a little different: They do not
lock up until they received at least 11 SMS-email messages with an
email address that is longer than 32 characters. The device will not
be able to receive any other SMS message after that - upon receiving
the next message, the phone will just display a warning that there is
not enough memory to receive further messages and that data should be
deleted first. This message is even displayed on an otherwise
completely "empty" device.

After switching the phone off and on again, it has limited capability
for receiving SMS messages again: If it receives a SMS message that is
split up into several parts (3GPP TS 23.040, 9.2.3.24.1 Concatenated
Short Messages) it is only able to receive the first part and will
display the "not enough memory" warning again. After powercycling the
device again, it can then receive the second part. If there is a third
part, it has to be powercycled again, and so on.

Also, an attacker now just needs to send one more "Curse Of Silence"
message to lock the phone up again. By always sending yet another one
as soon as the status report for delivery of the previous message is
received, the attacker could completely prevent a target from
receiving any other SMS/MMS messages.

Only Factory Resetting the device will restore its full message
receiving capabilities. Note that, if a backup is made using Nokia
PC-Suite *after* being attacked, the blocking messages are also
backuped and will be sent to the device again when restoring the
backup after the Factory Reset.

Note that not being able to receive SMS messages also means not being
able to receive MMS messages, since they are signalled by sending an
SMS message to the device.

"Curse Of Silence" messages can be generated with any phone or
cellular modem that supports 3GPP TS 27.005 AT commands and with most
Nokia phones also directly from the user interface. For example, on
S60 devices, when in the message editor, the type of the message can
be switched to "E-mail" under "Options" -> "Sending options" ->
"Message sent as". The 6310i conveniently offers a "Write email" menu
entry in the messaging menu.

The simplest form of content for a Curse Of Silence would be something
like "[email protected] " (the digits are used only to
illustrate the length of the "email address" of more than 32
characters). Note the space at the end of the message!


Workaround
==========

None known for the user side.

Until a firmware fix is available, network operators should filter
messages with TP-PID "Internet Electronic Mail" and an email address
of more than 32 characters or reset the TP-PID of these messages to 0.


Credits
=======

Tobias Engel <[email protected]>
November 9, 2008

Many thanks to Frank Rieger for spending countless hours cutting and
editing the video.


Detailed List of Affected Products
==================================

Tested on several S60 2.6, 3.0 and 3.1 devices. Since the vulnerable
component is a S60 base functionality, it seems safe to assume that
all devices with these OS versions are affected.

S60 3rd Edition, Feature Pack 1 (S60 3.1):
Nokia E90 Communicator
Nokia E71
Nokia E66
Nokia E51 
Nokia N95 8GB
Nokia N95
Nokia N82
Nokia N81 8GB
Nokia N81
Nokia N76
Nokia 6290
Nokia 6124 classic
Nokia 6121 classic
Nokia 6120 classic
Nokia 6110 Navigator
Nokia 5700 XpressMusic

S60 3rd Edition, initial release (S60 3.0):
Nokia E70
Nokia E65
Nokia E62
Nokia E61i
Nokia E61
Nokia E60
Nokia E50
Nokia N93i
Nokia N93
Nokia N92
Nokia N91 8GB
Nokia N91	
Nokia N80
Nokia N77
Nokia N73
Nokia N71
Nokia 5500
Nokia 3250

S60 2nd Edition, Feature Pack 3 (S60 2.8):
Nokia N90
Nokia N72
Nokia N70

S60 2nd Edition, Feature Pack 2 (S60 2.6):
Nokia 6682
Nokia 6681
Nokia 6680
Nokia 6630


Change History
==============

December 30, 2008:
Removed auth details since they are no longer required

December 21, 2008:
Corrected version numbers for S60 2nd Edition

December 13, 2008:
S60 2.8 devices react like S60 3.1 devices, not like S60 2.6 or 3.0
devices

# milw0rm.com [2009-01-01]